Hi Todd (and others!)
I’ve let a few people know but thought it was worth posting to the
listserv….
If you go to the TechGUIDE
http://rehabtech.eng.monash.edu.au/techguide/
and choose lower limb….you can select to do an “Advnanced search and
compare” if you choose knee and angle” less than 120 degrees” you will
get about 60 results (and a few EXO sorry!)
It’s the most powerful tool I knopw for this type of stuff (even if I
say so myself!)
By the way, this isn’t an ad as we don’t profit from it
Thnaks
Bill
Todd Sleeman wrote:
>I’m looking for a knee unit that as to meet these two requirements:
>
>-it is a single-axis free swing or safety knee
>
>-it only flexes to 110-120 degrees.
>
>
>
>I know I can achieve this with an exo set-up, but am looking for it in
>an endo design.
>
>
>
>It’s a long story on the reasons why, but if anyone has any leads, I’d
>appreciate it.
>
>
>
>
>
>Thanks,
>
>
>
>Todd
>
>__________________________________
>
>Todd J. Sleeman, CP
>
>Certified Prosthetist
>
>
>
> ********************
>To unsubscribe, send a message to: [email protected] with
>the words UNSUB OANDP-L in the body of the
>message.
>
>If you have a problem unsubscribing,or have other
>questions, send e-mail to the moderator
>Paul E. Prusakowski,CPO at [email protected]
>
>OANDP-L is a forum for the discussion of topics
>related to Orthotics and Prosthetics.
>
>Public commercial postings are forbidden. Responses to inquiries
>should not be sent to the entire oandp-l list. Professional credentials
>or affiliations should be used in all communications.
>
>
—
Bill Contoyannis
Manager / Rehabilitation Engineer, REHAB Tech
Centre for Biomedical Engineering – Monash University
Dept of Electrical and Computer Systems Engineering
Room G19 Bldg 35 Clayton Victoria 3800
AUSTRALIA
email: [email protected]
Website: www.monash.edu.au/rehabtech
General Office: Tel: (61 3) 9905 3466
Direct Tel: (61 3) 9905 4231
Fax: (61 3) 9905 4069