Thank you for the replies. I have responded to the replies after each one.
We are in a situation where we have clients with devices that work very well
for them and we no longer have access to the liners similar to the ones they
are currently using. The Alpha liner is the closest available option
though it has a fabric coating on the outside. We have concerns about this
eliminating the airtight seal as the liner is reflected over the proximal
trim line. We may experiment with a layer of silicone added to the outside
surface of the Alpha to get around the problem.
Sincerely,
Craig Smith
The replies and responses:
.
From: Carlos Quelhas
To: “‘[email protected]'”
Subject: RE: SILICON INSERT AVAILABLITY
Date: Tue, 18 Nov 1997 18:47:59 -0000
Return-Receipt-To:
Dear Craig:
Have you tried people at TEC INTERFACE SYSTEMS?
Best regards
Dear Carlos:
TEC does not recommend reflecting the liners over the socket trim line.
X-Authentication-Warning: chain: Host [172.17.5.2] claimed to be
romulan.grhosp.ab.ca
Date: Tue, 18 Nov 1997 10:27:45 PST
From: Dave Home
Reply-To: [email protected]
Subject: Re: SILICON INSERT AVAILABLITY
Priority: Normal
Delivery-Receipt-To: Dave Home
Return-Receipt-To: Dave Home
Craig, Alps will custom make a liner. They can be contacted at
1-800-574-5426. The liners made byAlpa are 46
cm. long but are not silicone. They can be contacted at 1-800-848-4930
(www.owwo.com).
David Home
Date: Tue, 18 Nov 1997 09:52:27 -0600
X-Sender: [email protected]
From: Brian
Subject: Re: SILICON INSERT AVAILABLITY
Dear David:
Please see reply to Brian.
Dear Craig
Contact Alps South Corp. @ 1-800-574-5426 I bielieve they will custom make
liners. Good luck.
Brian Gustin CP
Dear David and Brian:
Alps will no longer custom make liners as per our conversion with company
recently. We have concerns about the exterior covering of the Alpha liner
because we are using the air tight seal between the liner and the socket
(with the liner reflected over the proximal trim line) as part of our
suspension system. We may have to apply a silicone layer to the outside of
the Alpha in order to maintain a seal. They do appear to be the correct
thickness and length.
From: “Craig Steffen”
Organization: Ohio Willow Wood
Date: Mon, 17 Nov 1997 16:22:07 EST
Subject: Re: SILICON INSERT AVAILABLITY
X-Confirm-Reading-To: “Craig Steffen”
X-pmrqc: 1
Priority: normal
The Alpha Cushion Liner from Ohio Willow Wood fits this description.
Part number ALC-5036 would meet all of the above criteria.
Craig
Dear Craig:
We have concerns about the exterior covering of the Alpha liner because we
are using the air tight seal between the liner and the socket (with the
liner reflected over the proximal trim line) as part of our suspension
system. We may have to apply a silicone layer to the outside of the Alpha
in order to maintain a seal. They do appear to be the correct thickness and
length.
